Photos
Yamaha DM3 Standard
Image information
Description
DM3 Standard | |||
---|---|---|---|
Outline | |||
Mixing Capacity | Input Channels | 16 mono + 1 stereo + 2 FX return | |
Mix Buses | 6 | ||
Matrices | 2 (Supports Input to Matrix) | ||
Stereo Buses | 1 | ||
FX Buses | 2 | ||
Cue Buses | 1 | ||
General specifications | |||
I/O Connectors | Analog Input | 16 Mic/Line (12 XLR + 4 XLR/TRS Phones Combo) | |
Analog Output | 8 (XLR) | ||
Dante | - | ||
Network | 1 (RJ-45) | ||
USB TO HOST | 1 (USB Type-B, USB2.0) | ||
USB TO DEVICE | 1 (USB Type-A) | ||
Phones | 1 (TRS Phones) | ||
DC | 1 (XLR 4pin, DC power IN) | ||
User Interface | 1x 9-inch multi-touch screen, 9x faders (8 channels + 1 main), 1x "Touch and Turn" rotary encoder | ||
Recording & Playback | PC/Mac | Recording 18 track, Playback 18 track | |
USB storage device | Recording 2 track (USB hard disk / SSD / flash memory), Playback 2 track (USB hard disk / SSD / flash memory) | ||
Sampling frequency rate | 96 kHz / 48 kHz | ||
Signal delay | Less than 1.3 ms, (CH INPUT to OMNI OUT, Fs=96 kHz) | ||
Frequency response | +0.5, -1.0 dB 20 Hz-20 kHz, reference to the nominal output level@1 kHz, INPUT to OMNI OUT | ||
Total harmonic distortion | Less than 0.01 % 20 Hz - 20 kHz@+4 dBu into 10 kΩ, INPUT to OMNI OUT, Input Gain= Min*1 | ||
Hum & noise level | Equivalent input noise | -126 dBu typ., Input Gain= Max. | |
Residual output noise | -84 dBu, ST main off*2 | ||
Dynamic range | 110 dB typ., DA Converter, 106 dB typ., INPUT to OMNI OUT, Input Gain=Min. | ||
Crosstalk | -100 dB, adjacent INPUT/OMNI OUT channels, Input Gain= Min. @1 kHz*3 | ||
Power requirements | DC24 V/2.5 A, PA-L500 (100 V-240 V, 50 Hz/60 Hz) | ||
Power consumption | 43 W | ||
Dimensions | W | 320 mm (12.6") | |
H | 140 mm (5.6") | ||
D | 455 mm (18.0") | ||
Net weight | 6.5 kg (14.3 lb) | ||
Included Accessories | Owner's Manual, Power Adapter, Download Information | ||
Accessories | RK-DM3 | ||
Operating temperature | 0 - 40 °C | ||
Storage temperature | -20 - 60 °C |